A pump is an essential item of your cycling equipment. We offer different high-quality versions of bicycle pumps: a large capacity cylinder pump with footrest to pump the tyres fast and powerful at home or mini pumps, which can be taken along easily on every tour. For a particularly fine dosing of the air, you should choose a high-precision pump. Moreover, there are replacement parts available for bike pumps, like extra rubbers or tubes.
High-performance, top-quality floor compressor. This floor compressor features a remarkable number of technical refinements, in addition to its impressive pressure build-up. · high-power Aero large capacity cylinder made of steel for loss-free pressure build-up up to 11 bars/160 PS · broad base with anti-slip nodules for sturdy footing · top-mounted gauge with pressure-marking arrow · easy-to-grip handle for high operating convenience · with extra-long extremely flexible high-pressure hose and clip fixing · Xtreme Air Supply 2-in-1 pump head that enables pumping up hoses with Schrader or Presta valves without refitting (with included adapter also suitable for Dunlop valves) · with clip for hanging the hose on the pump · height: approx. 65 cm · weight: approx. 1.615 g
The ROSE Druckmacher ST180 features a sturdy, hard-wearing steel base and steel cylinder, and can reach a maximum pressure of 12 bar. Rubberised, ergonomically shaped handle for convenient use. The twin-valve pump head is easy to use: simply attach the required side to the valve and turn the lever over. · target pressure adjustable via rotating ring marking · steel base with rubberised underside · twin-valve 2-in-1 pump head for Presta and Schrader valves (with included adapter also suitable for Dunlop valves) · extra-length flexible high-pressure hose · adjustable clip for storage of hose · 2,5" gauge up to 12 bar/ 180 PSI · height approx. 67 cm · weight: approx. 1.840 g
Highly efficient road bike mini pump; its handy extensible hose reduces pressure at the valve while pumping; SmartHead® with twist top for Presta and Schrader valves; up to 11 bar; length: 18 cm; incl. frame holder for mounting under or instead of a bottle cage; approx. 78 g
Large steel base with rubberised underside ensures that the Druckmacher AL180 remains stable during pumping. The large 3" gauge display with clear digits integrated into the base enables convenient read-off. The 2-in-1 Clever Twin Valve pump head makes for extremely easy operation. The mounted valve attachment is simply turned over, depending on the type of valve. · target pressure adjustable via rotating ring marking · ergonomically shaped, rubberised handle · aluminium cylinder · Clever Twin Valve 2-in-1 pump head for Presta, Dunlop and Schrader valves · extra-length flexible high-pressure hose · adjustable clip for storage of hose · gauge up to 12 bar/ 180 PSI · height: approx. 67 cm · weight: approx. 1.630 g
Neatly processed precision pump for air suspension systems. Allover metal construction with high pressure manometer and precise air release valve for all suspension forks and dampers with Schrader valves. Its UP-SL pump head guarantees an attachment/removal of the pump head without pressure loss. A small lever makes sure that the Schrader valve of a damper or air fork is not opened before the pump head is attached. After pumping the lever is turned down again so that the valve is shut while removing the pump head and no air is lost. · suitable for Schrader valves · up to 21 bar/300 PSI · special seals: very soft, light pumping · elastic hose connection · length of the pump: approx. 365 mm · weight: approx. 190 g
One of the top-selling floor pumps. Steel cylinder for powerful pumping; TwinHead® for Presta, Schrader and Dunlop valves; comfort handle with rubber inserts; easy to read manometer; adapter for balls/air mattresses; up to 11 bar; height: 68 cm; weight: approx. 1,4 kg
This all-rounder impresses with its long steel tube that ensures great volume per stroke and allows you to inflate every tyre in no time. An extra large manometer at the pump's foot measures in bar and in PSI and can be read easily. The MultiValve head is suitable for Schrader, Presta and Dunlop valves. It can be secured against slipping at the valve. · height: approx. 73 cm · weight approx. 1,3 kg · hose length: approx. 85 cm · maximum pressure up to 12 bar/174 PSI
For almost 40 years, the RENNKOMPRESSOR has been a very popular pump in international cycling. Steel tube with retractable steel feet; the MultiValve head is suitable for Schrader, Presta and Dunlop valves. It can be secured against slipping at the valve. · height: approx. 65 cm · weight: approx. 2,3 kg · hose length: approx. 120 cm · maximum pressure up to 16 bar/230 PSI
Too good to be true: 55 grams. The reference in road bike micro pumps; not a single unnecessary gram, full power, sensational quality; body and handle made of real carbon; head made of craton rubber; handle lock; suitable for Presta valves; up to 11 bar; length: 16 cm; incl. holder*; approx. 55 g Micro Rocket AL Alu Same construction as item no. 353496, but as aluminium version; length: 16 cm; incl. holder*; approx. 65 g * Incl. frame holder for mounting under or instead of a bottle cage.
A high-pressure floor pump for the purists that never loses sight of what’s important. The small cylinder cross-section ensures optimal pressure transfer, which translates into a higher bar range. Large digit display on the gauge makes for convenient read-off. · target pressure adjustable via rotating ring · pressure-release valve integrated into pump head can be operated via button switch · ergonomically shaped aluminium handle · light yet stable base construction from cast aluminium · high-pressure cylinder, piston and pump head made of aluminium · Clever Twin Valve 2-in-1 pump head for Presta, Dunlop and Schrader valves · extra-length flexible high-pressure hose · adjustable clip for storage of hose · easily readable 3" ma-nometer up to 18 bar/260 PSI · height: approx. 67 cm · weight: approx. 1.280 g
Highly efficient mini pump, adapted to MTB tyres; its handy extensible hose reduces pressure at the valve while pumping; SmartHead® with twist top for Presta and Schrader valves; cylinder and handle made of aluminium; up to 6 bar; integrated dirt cap; incl. frame holder for mounting under or instead of a bottle cage; length: 19,6 cm; approx. 114 g
The high-pressure floor pump for extra air power. With a pressure output of up to 16 bar/240 PSI, this pump is ideally suited to all racing cyclists, but also to trekking and MTB cyclists. Reversible twin-valve head can be attached to a Schrader valve as well as to Presta and Dunlop valves. · aluminium cylinder · comfortable, robust wooden grip · large, easily readable gauge with setting ring · a pressure-release valve is built into the pump head for precise air pressure setting · extra-length flexible high-pressure hose · with clip for hanging the hose on the pump · height approx. 67,4 cm · weight: approx. 1.258 g
Pocket Shock DXG puts considerable pressure on dampers and suspension forks up to 20 bar (285 PSI). With a 360° rotatable valve arm, precision manometer and air release valve. The special shock valve avoids pressure loss when detaching the pump. · suitable for Schrader valves · length: approx. 215 mm · weight: approx. 170 g
Inflates your tyre in no time: With the Topeak AirBooster Race Pod X you are perfectly prepared for an emergency during training or competition. The AirBooster CO2 cartrige inflator is equipped with a pump head suitable for Presta and Schrader valves and is thus a good solution for time-critical inflation during a triathlon. The set can be attached e.g. to the seat tube by means of velcros. The module can easily be mounted on both round and aero tubes. To inflate the tyre, you just have to operate the button at the pump head and the air is pumped into the inner tube. A dirt cap is integrated into the pump head. 2 tyre levers made of fibreglass composite top off the package. 2 threaded CO2 cartridges are included (for replacement cartridges see item no. 474190). Details: • 2 tyre levers made of fibreglass composite • pump head with integrated dirt cap • velcro mounting kit for round tubes and aero tubes • holder for tyre levers and CO2 cartridges Specs: • suitable for Presta and Schrader valves • weight: approx. 173 g • dimensions: approx. 12,3 x 6,8 x 5,8 cm • material: aluminium, CNC-milled Including: • 2 threaded CO2 cartridges (approx. 16 g) Manufacturer's ref.: 157 000 72
As you may have guessed from its name, this floor pump has a digital display, which switches between bar and PSI at the press of a button. Everyone using Schrader or Presta valves can use this pump as its 2-in-1 pump head is designed for both types of valve. Its display is easy to read and is well protected in a zinc block. The pump stands stably on its broad feet arranged in a V shape and is easy to use, whatever type of shoes you are wearing. The wooden handle is ergonomically shaped so that it is comfortable to use. · gauge shows pressures up to 14 bar/200 PSI · high-pressure cylinder and piston rod made of aluminium · movable clip to hold the hose · digital LCD display · extra-long, flexible high-pressure hose · lithium battery has a life of approx. 3000 hours · incl. adapter for footballs and inflatable mattresses (screwed into base) · height: approx. 68,5 cm · weight: approx. 1.927 g Note: Valves must be threaded!
Solid floor pump that is well suited for workshop use, too. Steel tube with large steel base plate. The MultiValve head is suitable for Schrader, Presta and Dunlop valves. It can be secured against slipping at the valve; easy to read precision manometer on top with adjustment ring. · height: approx. 65,5 cm · weight: approx. 1,7 kg · extra long high-pressure hose: approx. 120 cm long · incl. 2 adapters for balls, air mattresses etc. · maximum pressure up to 10 bar /144 PSI