Bike Stand / Cycle Holder
We offer a great variety of practical bicycle stands and holders. The offered models are divided into 2 categories: on the one hand, there are models for frame assembly available, on the other hand, you can find unmounted stands and holders. If you are interested in models for frame assembly, we offer various centrestands and rear stay stands. The category of unmounted stands contains ceiling holders, wall holders and free-standing stands.
Well-designed, extremely robust bike stand that guarantees easy handling. Once you have unfolded it, you can roll a race cycle, MTB or ATB onto its cradle, which can hold either the bike’s front wheel or rear wheel. The holder arm with guide pulley moves into the position which is required by the wheel size and stabilises the bike with its spring-supported mechanism. · can be folded together with a snap mechanism · high stability thanks to a stable steel tube construction and 4 rubberised feet · pass through width: approx. 69 mm · suitable tyre width: max. 2,5"
Simply roll the front or rear wheel in and your bike will stand up. Two guide rollers provide support; the height of the guide roller on the vertical stabiliser can be adjusted infinitely. The horizontal guide roller can be adjusted via three bore holes. This allows the stand to be adjusted precisely to any size of bike. · suitable for road bikes, MTBs, ATBs · powder coated stand · pass through width: approx. 67 mm · can be dismantled for easy transportation or storage · 4 rubberised feet · dimensions: approx. L: 43,5 cm/W: 43 cm/H: 84,5 cm
Ideally suited for space-saving storage of your bicycle in the garage, basement, summer house etc. Simply screw it to the wall, fold out the frame holder, mount the bike and hook it in. · bike is held on stable rails · frame holder can be folded · rubberised frame holder and rail ends · height-adjustable frame holder · also suitable for oversize and Y frames · length of the bike rail: approx. 150 cm · height of the wall holder: approx. 95 cm · adjustable arm length of the frame holder: approx. 30 - 37 cm · max. load capacity: 15 kg · weight: approx. 2 kg · incl. fixing material
The Thule wall bracket keeps your garage tidy. Its wide arms make it suitable for storing both bikes and bike racks tidily. When not in use, the arms can be folded up to save space. The rubberised coating protects against scratches. · max. 40 kg load · without fixing materials
Hook your bike onto it, lift it, secure it - ready! With this ceiling bike lift, even trekking bikes can be easily lifted. Care and maintenance works can be done comfortably. Also suitable for overwintering your bike, because the tyres do not touch the floor. · suitable for all bike lengths and types · smooth-running cable pulley with locking device · plastic coated hooks for paint-friendly suspension · max. ceiling height: 3,65 m · max. bike weight: approx. 22,5 kg · dimensions: approx. 98 x 4 x 2 cm · incl. fixing material
This extremely stable ceiling-floor rack tidies the place up! You can attach as many holders as you like, so that other things can be stored, too. The rack is suitable for ceiling heights from 192 cm - 340 cm. · suitable for tubes with a maximum diameter of approx. 60 mm · secure height adjustment via quick-release, with fine adjustment for optimal hold · max. total load: 80 kg · max. load per holder arm: 20 kg · incl. 2 holder arms (paint-friendly and angle-adjustable)
You can attach up to 2 bikes and a lot of smaller parts, such as helmet, shoes etc. to this stable wall holder. When not in use, you can simply fold down the wall holder with a flap mechanism in order to save space. · suitable for minor care and maintenance works · paint-friendly mount for 2 bikes · also suitable as a shelf · dimensions: folded: approx. 66 x 33 x 5 cm, unfolded: approx. 52 x 33 x 30 cm · incl. fixing material
With one holder being higher than the other, this bike stand provides space for two bikes side by side. This also keeps the handlebars from getting stuck. Whether indoor or outdoor use - this robust tube construction holds your bikes securely. · also suitable for on the go · incl. screws and dowels (for ground erection) · pass through width: approx. 55 mm · dimensions: approx. L: 56 cm/W: 36 cm/H: 24 or 35 cm · 1 piece for 2 bikes
The Rose Display Stand is ideal for storing two bikes in a mimimum amount of space. The height of the two holder arms can be adjusted without tools via quick releases, and the angle of the arms can be adjusted independently of one another over a range of 90°. 4 steel feet give the stand a high degree of stability, which can be increased further by fixing it to the wall (fig. 1). · suitable for tubes with a maximum diameter or approx. 50 mm · protective frame support made of soft plastic · feet can be screwed into the ground · wall bracket can be removed · maximum load per holder: 18 kg · for wall mounting: distance between wall and centre of the top tube mount: approx. 43 cm · height: approx. 223 cm, width of the stand: approx. 87.5 cm · incl. fixing material for wall mounting
Multi Zoom is length-adjustable in 7,5 mm steps and can thus be adapted to 26"-28" bicycles. Its large stand foot, its cushioned end stop and die cast aluminium especially at the clamping area turn it into a stable and very convenient support. · stainless steel screws · length-adjustable via two screw connections
Saves space and protects your bike! With the Free Stopp Vario XL, you can effortlessly suspend your bike at a height of up to 1,20 m and underneath, there is still plenty of room for storing things. · tyres are relieved · suitable for all common frame Ø and frame shapes · complete adjustment without tools · max. load: approx. 20 kg · incl. paint-friendly and angle-adjustable holder arm
This stand saves space! The Xtreme Multiflex stand can be fixed in any room with a solid floor and a solid ceiling. Angled surfaces are no problem for the adjustable rubberised feet. Bikes or other items (fig. 4) can be attached to the paint-friendly hooks safely and at variable heights. The stand can be adjusted from 160 cm up to 305 cm. · suitable for tubes with a maximum diameter of approx. 60 mm · completely tool-free adjustment · secure height adjustment via quick-release · maximal total load: 60 kg · maximal load per holder: 15 kg · incl. 2 holders
Compact, foldable stand for every bike tyre size from 20" to 29". Its spring-loaded mechanism adjusts to every tyre size automatically. This is a perfect device for tidying up your team tent or your garage. · suitable for road bikes, MTBs and ATBs · can be folded to a small size (height: approx. 43,5 cm, width: approx. 14 cm, depth: approx. 8,3 cm)