Stylish chainring screws that improve the look and reduce the weight of every crank. The screws are tightened with a 5 mm hex key and a chainring screwdriver. · material: aluminium 6061 · thread type: M8 · weight per...
· suitable for Truvativ and SRAM MTB/Road cranksets · GXP technology (external bearing shells) · aluminium bearing shells · sealed bearings · suitable for 68/73 mm casing width · BSA (1.37 x 24)
Thread adapter that allows fitting BSA bottom bracket cups and bottom brackets with 1.37 x 24 thread and 68 mm case width in BB30 frames.
Made of Ergal aluminium. Suitable for double and triple cranks. · 10 pieces · super light · length: 9 mm
Required when using an Alfine or Nexus hub gear in connection with vertical dropouts, as long as no rear derailleur takes over the tensioning function. · for pinion size: 16 - 23 teeth
· 8 mm steel hex screws · for square bottom brackets · 1 pair
FC-4500 / 4503 / 4550 / R600 / R550 / R553
Crank screws with integrated crank extractor and aluminium caps. For dismounting the crank, you now only need an 8 mm hex key, which is a big advantage - not only when travelling. · for square bottom brackets · 1 pair
- steel crank extractor - Crank screws with integrated extractor, suitable for cranks with multi-teeth mount (not suitable for square cranks). · 1 pair
FC-M 800 / 761 / 760
Cone set for fastening the Xtreme trousers protection ring II at Hollowtech II cranks (cranks with integrated axle). · set, consisting of 2 wedge clampings with different diameters Attention: not suitable for Shimano...
· 1 piece
FC-M 960 / 805
for FC-7800/7803
for FC-6603 / 6600 / 5603 / 5600 / R700 / FC-4550 / 4503 / 4500 / R600 / R553/
- FC-M 770/ 771/ 582
