CYCLUS: Products for cyclists

Such a tool is absolutely indispensable for the correct mounting of headsets, because inappropriate tools (e.g. hammers) often damage the sensitive bearing shells. This Cyclus high-quality tool offers the attributes of a...

You can control and correct the exact geometrical position of the derailleur hanger at the dropout with this tool. A contorted derailleur hanger is one of the most common reasons for problems with a bicycle’s...

A lot of people do not use appropiate tools when mounting cones. The consequences are contorted cones, damaged bearing surfaces and in the worst case the destruction of the cone seat, which makes the whole fork unusable...

From GO to STOP - when is the chain really worn? The Cyclus chain wear gauge gives you an accurate answer. With this measuring device made of stainless steel, long term monitoring of chain wear is made possible. The...

Very solid tool. Thanks to its precisely machined guide bushing, it allows you to drive the claw for non-threaded headsets in straight. The screw-fit bush for the guide can be changed easily from 1" to 1 1/8".

This tool makes pretensioning child’s play! The Cyclus centering bit can be used in a cordless screwdriver to facilitate the pretensioning of spokes by hand when constructing a new wheel. The centering tip is...

· for mounting/dismounting Campagnolo Ultra Torque bearing cups · with square fitting for 3/8" ratchet and torque wrench · also suitable for: Shimano Hollowtech II (except BB-9000), FSA Mega Exo, Race Face X-Drive...

- for comfortable and safe dismantling of headset bearing shells - Of course you can get the bearing shells out of the frame somehow without this aid. But frame and tools will certainly suffer and you might even injure...

This tool serves to ideally adjust the seating of your fork cone. Please note that this tool was designed for threaded forks. Should you wish to use it for non-threaded forks, then you will have to clamp your stem...

This metal slide gauge allows measurement accurate to a tenth of a milimetre. · incl. locking screw · incl. plastic box · total measuring range: 15 cm

This thread cutting tool helps to get the threads in the crankset casing optimally coaxial. If they are not coaxial, the bearing gets stressed. It will then run stiffly and wear out prematurely. · available for BSA or...

· ensures correct tyre seating for wire-beaded and tube tyres · also ideal to remove tube tyres · suitable for all tyre sizes

The handy digital hanging scale is designed to measure accurate weight of various things up to max. 50 kg in 10 g steps. The rubberised double hook protects the surface of the hanged article and holds it safely in place...

This tool is used to exactly align the seating of the headset bearing shells to one another (coaxially) and to mill them. If this is not done, when assembling a new frame, then the headset can jam and cannot be adjusted...

The Cyclus Tools repair tap reams out the damaged thread while cutting a larger thread (M16) at the same time. Then threaded inserts with a 9/16" internal thread (item no. 1724499) are screwed into the crankarm. · 1...

Robust press tool for all Pressfit joints. This robust spindle press with a T bar and threaded bushing ensure precise work. With the optionally available press rings, every joint can be cleanly pressed in. Under item...