Please note: Due to the high demand, Continental cannot keep up with the production of this tyre. That’s why we cannot give you a specific delivery date for sizes that are currently out of stock. We will however make every effort to get as many tyres as possible asap. Thank you very much for your comprehension. Your ROSE team The reference tyre! · advanced BlackChili compound for low rolling resistance, high mileage and maximum wet weather grip · Vectran™ breaker for unsurpassed puncture protection · available in sizes: 650 x 23C, 700 x 20C, 700 x 23C, 700 x 25C, 700 x 28C Please specify size!
After 10 years, it's time for an all-round finish of the Marathon Plus range. The 5 mm thick SmartGuard insert is further developed, the "Anti-Aging" side wall prevents cracks caused by a too low air pressure. The high-quality design of some sizes is optimised for e-bikes with up to 50 km/h pedalling support, which makes this tyre and ideal companion for your pedelec, too. · with reflective stripes e-bike ready up to 50 km/h: 26x1.75, 700x35C, 700x38C, 28x1.75
The SARI T-19 R rim has on both sides a reflective ring that has been attached using a special procedure. Double eyelets and 2 additional reinforcement tubes make this Xtreme rim virtually unbreakable. Offroad use and tours with a lot of luggage are no problem. The sidewalls have been milled for an optimal braking behaviour and a wearout indicator provides additional protection. · for Presta valve · with double eyelets · ETRTO: 622 x 19 C · width: approx. 24,4 mm/height: approx. 21,2 mm · ERD: 598,5 mm · weight: approx. 620 g · required rim tape width: 22 mm · available in 32 or 36 holes Please specify number of holes!
Wheel set consisting of front and rear wheel marked "R500". · ETRTO: 622 x 15 C · front wheel: 20 black stainless steel spokes, radial · rear wheel: 24 black stainless steel aero spokes, two-cross · rim width: approx. 20,8 mm/height approx. 24 mm · steel axles, steel freewheel body · rim with wear indicator · for Presta valves (min. length: 40 mm) · compatible with 7-/8-/9-/10-speed Shimano HG · weight: FW: approx. 822 g/RW: approx. 1.078 g (without quick release) · hub width: FW: 100 mm/RW: 130 mm · incl. quick release with aluminium lever, rim tape
Stable, durable and rightly a bestseller in its category. Thanks to high-grade 6106 aluminium and double spoke eyelets, this 25 mm wide rim is perfectly designed for modern trekking and touring bikes. · width: approx. 25 mm/height: approx. 19,5 mm · weight: approx. 595 g · ETRTO: 622 x 19 C · ERD: 600 mm · for Schrader and Presta valves (incl. adapter) · with double eyelets · required rim tape width: 22 mm · 36 hole
The Mavic Cosmic Pro Carbon Exalith road wheelset offers high aero efficiency and stiffness without compromising on weight. The proven carbon/aluminium clincher tyre rim benefits from the Exalith 2 technology, extra-long spokes and the smooth running QRM+ cartridge bearing hubs typical for Mavic. A high-quality all-rounder with racing spirit. Consisting of front and rear wheel: • Width: approx. 19 mm/height: approx. 52 mm • ETRTO: 622 x 13 C • Weight: front wheel: approx. 990 g/rear wheel: approx. 1150 g (incl. tyres); front wheel: approx. 730 g/rear wheel: approx. 890 g (without tyres) • Compatible with 8-/9-/10-/11-speed Shimano HG / SRAM • For Presta valves with a minimum length of 60 mm (when using shorter valves, you can inflate the tyre with the included adapter) • Number of spokes: front: 16 (radial)/rear: 20 (left radial, right 1-cross), aero steel spokes • Aluminium hub body, aluminium axle • 2 sealed cartridge bearings, micro-fine adjustment (QRM+) • Rim flanges made of 12K carbon • Aluminium rim base with Exalith2 flanges for very good braking performance in wet conditions and increased durability • SUP welded rim seam • Incl. Mavic Yksion Pro PowerLink and GripLink tyres with Mavic inner tubes • Hub width: front: 100 mm/rear: 130 mm • Incl. quick release, spoke wrench, special wrench to fasten spokes/nipples and to adjust bearings, valve adapter (length: 60 mm), brake pads compatible with Shimano/SRAM brakesfor Exalith2 flanges Manufacturer's ref. P5470125 (tyre width: 23 mm), P5470130 (tyre width: 25 mm)
Well-designed, extremely robust bike stand that guarantees easy handling. Once you have unfolded it, you can roll a road bike, MTB or ATB onto its cradle, that can hold either the bike’s front or rear wheel. The holder arm with guide pulley moves into the position which is required by the wheel size and stabilises the bike with its springsupported mechanism. · can be folded together with a snap mechanism · high stability thanks to a stable steel tube construction and 4 rubberised feet · pass-through width: approx. 69 mm · suitable tyre width: max. 2,5"
The top model of Shimano’s hub dynamo series comes with a sensationally low weight and a rolling resistance that has been reduced by 40% compared to the DH-3N30 hub dynamo. Its anodised surface makes the XT hub dynamo resistant to all external influences. Single Contact seals and precisely machined bearing contact surfaces provide a very high durability. The included overvoltage protection prevents your front or back light from blowing. · Single Contact sealing system · coil and axle made of aluminium · suitable for all dynamo-operated 6 V lighting systems · 26"-29" wheel size · 6 volt, 3 watt · hub width: 100 mm · weight: approx. 483 g (without quick release) · incl. quick release · incl. connector and overvoltage protection SM-DH10 · available as 32 or 36 hole version Please specify number of holes! To prevent your lights from being permanently on, you will need a front light with a switch!
· suitable for Shimano cassette hubs and for cassette hubs that are compatible with Shimano · material: steel, chrome coated · incl. head lock nut · gradations: 11-32 (11-12-14-16-18-20-22-25-28-32) 11-34 (11-13-15-17-19-21-23-26-30-34) 11-36 (11-13-15-17-19-21-24-28-32-36) Please specify gradation! (Similar to photo; gradations may vary)
The overall capacity of the proven Alfine Premium quality has now been increased by adding 3 more gears to make it 11-speed, leading to an increased total capacity of 409%. The oil lubrication assures optimal function and high durability. · 11-speed Rapidfire Plus shift levers (SL-S700) · 20 tooth sprocket (CS-S500) · hub width: 135 mm · chainline: 41,8 mm · brake disc fixing with Center Lock system · weight: approx. 1.665 g · lock washers for vertical dropouts (blue/green) · incl. fixing material, assembly instructions, cable and cable sleeve · available in a 32 or 36 hole version Please specify number of holes!
Legendary Mavic Ksyrium Pro success story combined with Exalith rims in a uniform Stealth look. Only the white aluminium hubs with an aerodynamic large flange still reveal its origins. This wheelset combines strong performance with outstanding reliability. The Exalith surface of the rims even ensures excellent braking power in wet conditions. The ISM 3D concept provides noticeable weight reduction and optimized aerodynamics. Precisely adjustable QRM+ bearings run smoothly and the proven YksionPro tyre combination ensures grip and power transfer par excellence. Consisting of front and rear wheel: • Width: approx. 19 mm/height: approx. 24 mm (front wheel), approx. 25 mm (rear wheel, asymmetric) • ETRTO: 622 x 15 C • Weight: front wheel: approx. 885 g/rear wheel: approx. 1070 g (incl. tyres); front wheel: approx. 605 g/rear wheel: approx. 790 g (without tyres) • Compatible with Shimano HG/SRAM 8-/9-/10-/11-speed • For Presta valves with a minimum length of 42 mm • Number of spokes: front: 18 (radial) Zicral spokes /rear: 20 Zicral spokes (2-cross on the left, radial on the right) • Carbon/aluminium hub body (front), aluminium hub body (rear), aluminium axle • 2 sealed cartridge bearings, micro-fine adjustment (QRM+) • Maxtal-aluminium rims with Exalith2 flanges for very good braking performance in wet conditions and increased durability • SUP welded rim seam • Incl. Mavic Yksion Pro PowerLink and GripLink tyres (700x25 C) with Mavic inner tubes • Hub width: front: 100 mm/rear: 130 mm • Incl. quick release, 2x special wrenches to fasten spokes/nipples and to adjust bearings, brake pads compatible with Shimano/SRAM brakesfor Exalith2 flanges Manufacturer's ref. P5560130
· suitable for Shimano cassette hubs and for cassette hubs that are compatible with Shimano · material: steel, nickel coated · follow-up model of the CS-6600 cassette · gradation 11-23 (11-12-13-14-15-16-17-19-21-23) 11-25 (11-12-13-14-15-17-19-21-23-25) 11-28 (11-12-13-14-15-17-19-21-24-28) 12-23 (12-13-14-15-16-17-18-19-21-23) 12-25 (12-13-14-15-16-17-19-21-23-25) 12-30 (12-13-14-15-17-19-21-24-27-30) Please specify gradation ! (Similar to photo; gradations may vary)
Wheel set consisting of front and rear wheel · ETRTO: 622 x 17 C · precise steering even at high speeds due to further reduced susceptibility to side winds and air resistance · rims: aluminium rim flange with welded rim seam and wear indicator; height: approx. 50 mm, width: approx. 22,4 mm, material: CFRP (carbon-fibre-reinforced plastic)/aluminium · hubs: wider flange spacing for increased stiffness, titanium freewheel body with fast pawl intervention, high-quality angular contact bearings, labyrinth and low friction seals, oversized aluminium axle for increased rigidity · black stainless steel aero spokes FW 16 radial (butted 2,0/1,8/2,0 mm)/RW 21 OptBal 2:1 spoke technology (14 spokes at right and 7 at left, butted 2,0/1,8/2,0 mm) with aluminium nipples, three-cross at right, radial at left · for clincher tyres · for Presta valves (min. length: 80 mm) · 7-/8-/9-/10-/11-speed Shimano HG compatible · weight: FW: approx. 752 g/RW: approx. 920 g (without quick release) · hub width: FW: 100 mm/RW: 130 mm · incl. quick release with aluminium lever, rim tape and 10-speed spacer ring