Bicycle seatposts for MTB, trekking or road bikes
Rigid or suspension seatposts, made from carbon or aluminium
Here you will find a huge range of suspension seat posts, rigid seat posts and adjustable seat posts. It is important to choose the right seat post diameter and length for your bike.
Suspension seat posts offer shock absorption and thus increased comfort while riding. Some models even allow for a height adjustment during the ride. Special constructions ensure low wear. ar.
As regards conventional rigid seat posts, we offer high-quality models made from aluminium or carbon. Aluminium seat posts are lightweight and solid, robust carbon seat posts can save a few grams more and absorb vibrations. Some models can also be adjusted in height while riding thanks to a special lever – which proves especially advantageous for mountain bikers in varied terrain.
In the category ‘accessories’, you will find seatpost clamps, adapters and replacement spring elements.
The proven parallelogram principle is used for this seat post, too. As opposed to other suspension seat posts, the Suntour moves downwards when compressing, as well as a little to the back. This means the seat height does not change as much. The SP12-NCX comes with brass bushes and with a saddle mount that is different from the one of the predecessor model. · material: aluminium and parallelogram with brass bushes · height up to saddle frame: approx. 110 mm · travel: approx. 48 mm · adjustable preload via steel spring · rear offset : approx. 25 mm · total length: approx. 350 mm · for riders from 65-95 kg · weight for Ø 27,2 mm: approx. 779 g · available in Ø 27,2 or 31,6 mm Please specifiy diameter! Attention: not suitable for mounting saddles with a strongly oval-shaped frame tube. Suitable saddles in our range are marked accordingly.
With the Magura Vyron eLECT you can equip your mountain bike, whether it is a hardtail or a full-susser, in no time with a Vario seat post. The fast mounting is made possible because no outer casings or hydraulic cables are required. With other systems, these have to be routed first and adjusted to the frame geometry. With this system, you simply have to fit the post and the remote control to the handlebar, the rest can be done wirelessly by means of proven ANT+ radio technology. At the touch of a button on the handlebar remote control you can make use of uncompromising 150 mm travel - steplessly. If you do not need the post from time to time, it falls into a "sleep mode" to save battery power, an integrated motion sensor recognises once you start riding again. In this way, you won't miss out on a dropping manoeuvre. A blinking light in the remote control shows the rider that the battery in the remote lever or the battery in the post is very low. The remaining power is however still enough for twenty manual drops directly at the seat post head. · adjustment via air spring · hydraulic clamping via valve with Magura Royal Blood · material shaft/head: aluminium, black anodized · rear offset: 0 mm · height adjustment: 150mm · installation height: approx. 57-207 mm · length: 446 mm · weight: approx. 595 g incl. remote control · mounting of eLECT remote control: can be mounted on the left or right · battery type remote control: CR2032 · transmission type: ANT+ Standard · battery type seat post: NiMH battery with micro USB charging port · charging time: approx. 3 hours · operating time: approx. 400 actuations or approx. 2 months · including: Magura Vyron eLECT Vario seat post incl. eLECT handlebar remote control Manufacturer's ref. 30,9 mm: 2700931 Manufacturer's ref. 31.6 mm: 2700932
Smart and lightweight. This carbon seat post stands out for its high stability and its aluminium twin-screw clamp. The UD carbon fabric truly upgrades the bike's look, however, the matt version is also convincing. Small shocks are asborbed by the Flex layer design and by a rear offset of 25 mm. • rear offset: approx. 25 mm • weight for Ø 27,2 mm: approx. 185 g • length: 350 mm • available in Ø 27,2 or 31,6 mm
This name stands for comfort and fun, combined with solid workmanship. The combination of steel spring and elastomer suspension keeps shocks and rough roads away from the rider. This lets you keep your bike under control at all times and noticeably relieves your arms and back. In addition to the optimal adjustment to the cyclist’s weight by adjusting the spring preload, this seat post offers yet another feature: via a knurled ring, the response can be smoothly, manually adjusted for every cyclist. · material: aluminium 6061 T6 · length: 350 mm · travel: 40 mm · height of top part: approx. 100 mm · for cyclists from 55-120 kg · weight: approx. 450 g · Ø 27,2 mm
Classically shaped, high-quality carbon seat post with UD finish. Its secure clamping mechanism with a double bolt fixing allows almost any saddle to be mounted. Strongly oval-shaped saddle rails are perfectly suitable, too. The lower clamp shell and the upper clamp plate are made of carbon and reduce the weight even further, without any loss of stability. · length: 350 mm · weight for Ø 27,2 mm: approx. 160 g · available in Ø 27,2 or 31,6 mm Please specify diameter!
The high-quality bearing of the Airwings Evolution 425 stands for great sensitivity with no maintenance. The clamp head ensures a good connection between the saddle and the seat post. It comes with three steel springs (1 long medium + hard, 1x short medium) and is thus individually adjustable to the rider’s weight. · For cyclists from 70-100 kg · Bearing: high precision linear ball bearings precisely guide the steel core in the seat post, without jamming · Overall length: approx. 425 mm · Travel: 50 mm · Height of top part up to the saddle frame: approx. 110 mm · Weight: approx. 895 g (27,2 mm) Attention: Not suitable for mounting saddles with a strongly oval-shaped frame tube. Suitable saddles in our range are marked accordingly.
Seat post for triathletes and racing cyclists, designed to encourage an aerodynamic position. Compared to a straight seat post, the offset is approx. 38 mm further to the front, increasing pressure onto the pedals. The rear knurled screw allows quick, precise adjustment of the saddle angle. · Aluminium 6061 T6, pearl-blasted · Insertion depth scale · Minimum insertion depth: 9 cm · Length 300 mm · Suitable for Ø27,2 mm (incl. 50mm long extension sleeve for Ø31,6mm) · Weight: approx. 336 g
The Xtreme Pro Double Bolt is 3D-forged from a single piece. Its silver finish excellently matches the look of modern racers. An infinitely adjustable saddle clamping and a scaled tube make it easier to get this important positioning right. Whether mountain race or time trial - with this seat post, optimising the saddle position is no problem. The two clamping bolts hold the saddle securely in every position. · material: aluminium 2014 · length: 300 mm · rear offset: approx. 26 mm · weight for Ø 27,2 mm: approx. 272 g · available in Ø 26,6 / 26,8 / 27,0 / 27,2 or 31,6 mm Please specify diameter!
Custom control. When freeriding or in technically challenging terrain, no seat height is "just right". When you're ripping through rolling terrain or over technical downhill trails, you have to adjust the saddle height within seconds - a child's play with the Reverb! The seat height is infinitely adjustable by up to 125 mm. Thanks to the hydraulic X-Loc remote control, you can easily lower or set back the seat post from the handlebar and control the return speed. The Stealth version also offers the possibility to route the cable neatly through the seat tube/down tube. The cable is not connected at the seat post head as usual, but integrated into the seat tube underneath. The Connectamajig technology allows for an easy and safe installation by disconnecting the cable at the remote lever, a small cable coupler links the vario line to a previously routed shift or brake cable casing. · triple sealing system · material shaft/head: forged aluminium 7050 · height adjustment: 125 mm · offset: 0 mm · minimum insertion depth: 80 mm · installation height: approx. 60 - 185 mm · weight for Ø 30,9 mm: approx. 562 g · incl. remote control for the handlebar (right-hand lever), mounting kit, Matchmaker X clamp, X-Loc bleed kit with 120 ml 2,5 wt oil, enduro collar and cable coupler. Please note: The frame has to be Stealth approved by the manufacturer! Manufacturer's ref. Ø30.9/380 mm: 00.6818.007.001 Manufacturer's ref. Ø30.9/420 mm: 00.6818.007.003 Manufacturer's ref. Ø31.6/380 mm: 00.6818.007.005 Manufacturer's ref. Ø31.6/420 mm: 00.6818.007.007
With the Xtreme Double Clamp, slipping carbon seat posts are finally a thing of the past. The double clamp mechanism of this CNC milled aluminium seat post clamp distributes the forces that are required to fix particularly carbon seat posts securely between two areas. First, the top of the saddle tube is clamped, then the seat post itself is secured with a second hex screw. This achieves a maximum clamping force but also distributes it to prevent damage to the material. · also suitable for aluminium seat posts · available in Ø (frame tube/seat post) 34,9/31,6 or 31,8/27,2 mm Please specify diameter!
The single bolt clamping head on this WCS seat post makes both installation and adjustment of the saddle angle quite easy. The low profile clamp mechanism prevents contact with the saddle shell and ensures a tidy appearance. The use of TR741 3D forged aluminium makes it torsion-resistant and lightweight, also making it a good choice for road bikes, MTB and ATB. · length: 350 mm (Ø 27,2 mm), 400 mm (Ø 31,6 mm) · rear offset: approx. 20 mm · weight for Ø 27,2 mm approx. 230 g · available in Ø 27,2 or 31,6 mm Please specify diameter! Attention: Not suitable for mounting saddles with a strongly oval-shaped frame tube. These saddles in our range are marked accordingly.
The WCS Trail Link seat post comes with a discreet matt finish and will upgrade not only your bike's look. Thanks to the use of 3D forged 7050 aluminium, the seat post also stands out for its stability, the wide clamping device reduces the load on the seat tube. · material: aluminium 7050 3D-forged · length: 400 mm · rear offset: approx. 15 mm · weight for Ø 27,2 mm: approx. 255 g · available in Ø 27,2 or 31,6 mm Please specify diameter!
If you like really tough rides, this seat post forged from a single piece of aluminium is just the right choice for you. · material: 2014-T6 aluminium · secure double bolt clamp · length: 400 mm · weight for Ø 27,2 mm: approx. 250 g · available in Ø 27,2 or 31,6 mm Please specify diameter!
For years, by.schulz has stood for best comfort and ergonomics and has been primarily known for their Speedlifter series. What functions perfectly at the front, is now also realized at the rear – maximum comfort and best ergonomics. The parallelogramm system suspension seat post works with progressive suspension; the system sensitively absorbs light shocks, hard impacts on the contrary are dampened with increasing spring resistance. A robust flat wire steel spring and elastomers make sure that you even won't feel the suspension when riding over potholes. Four additional steel springs – optionally available under item no. 2200668 – permit an individual adjustment according to the weight of the rider, riding position and riding profile. To individually and infinitely adjust the inclination of the saddle, you can use a T-30 star wrench. · material: forged aluminium, CNC machined · bearing: sleeve metal bearings with stainless steel axles · suspensions: steel spring · damping: elastomer · stack height up to saddle rail: approx. 99 mm · travel: approx. 30 mm · rear offset: 25 mm · total length: 350 mm · minimum insertion depth: 90 mm · weight for Ø 27,2 mm: approx. 615 g · individually adjustable with optional steel springs, for a rider's weight of 45-150 kg · medium spring stiffness: 60-85 kg · standard spring stiffness: 80-105 kg Including: Seat post incl. textile cover to protect the suspension elements Note: Does not fit saddles with a strongly oval-shaped saddle rail! Manufacturer's ref. medium Ø27,2 mm: 10190 Manufacturer's ref. medium Ø31,6 mm: 10211 Manufacturer's ref. standard Ø27,2 mm: 10352 Manufacturer's ref. standard Ø31,6 mm: 10354
The material used (2014 aluminium) ensures optimal mechanical characteristics and high durability as well as a low weight. Thanks to the clear scale, you can precisely adjust the seat height without having to do any annoying measuring. As the saddle angle can be smoothly adjusted, you can very easily set the exact seat position with the Xtreme Pro Double Bolt. The saddle is clamped with a separate bolt on each rail to guarantee high stability and safety. · length: 400 mm · rear offset: approx. 26 mm · weight for Ø 27,2 mm: approx. 311 g · available in Ø 27,2 or 31,6 mm Please specify diameter!