Cycling comfort – with the ergonomics specialists of ergotec
The right riding position: ergotec bicycle parts
The company ergotec was founded in the town Wickede in North-Rhine Westphalia in 1918. Since 1998, the growing company has been managed by Willi Humpert in the fourth generation. Since the beginning, the company has focused on the development and production of bicycle add-on parts such as handlebars, stems and grips. Over the course of many years, the developer have become an important partner of the bicycle industry. Humpert especially became popular as a supplier of bicycle parts.
The Ergotec MF2 grips impress with their individual adjustment possibilites, their ergonomic shape and outstanding cushioning characteristics. Thanks to the multi-part construction, the grips can be adapted to the needs of the rider. The handlebar padding as well as the bar end can be angle-adjusted to the grip surface which provides a noticeable support. · easy clamping and adjustment via a single screw · ergonomically shaped bar ends with thumb rest · structured contact area for a non-slip grip · material: clampring, plugs, bar ends, rest for the ball of the thumb: aluminium; grip surface, coating of bar ends and ball of the thumb rest: black version: craton, brown version: Dura cork · suitable for handlebar Ø 22,2 mm · length: approx. 130 mm · length of the grip surface: approx. 105 mm · length of the bar end’s grip surface: approx. 70 mm · 1 pair · black craton version available in grip Ø 34 mm or 40 mm Please specify size!
A tailor-made handlebar! One shape, 6 sizes. This system allows you to adjust the width and grip angle to your body. · material: AL 6061 T6 aluminium · height: approx. 30 mm · handlebar clamping: Ø 25,4 mm · available in sizes: Size: XS · bend: 6° · weight: approx. 260 g · width: approx. 550 mm Size: S · bend: 8° · weight: approx. 270 g · width: approx. 570 mm Size: M · bend: 10° · weight: approx. 280 g · width: approx. 590 mm Size: L · bend: 12° · weight: approx. 290 g · width: approx. 610 mm Size: XL · bend: 14° · weight: approx. 300 g · width: approx. 630 mm Size: XXL · bend: 16° · weight: approx. 310 g · width: approx. 650 mm Please specify size!
Improved pedalling performance. With its large, ergonomically shaped surface, the EP-1 pedal hugs the sole of your feet and ensures thus optimum power transmission. With conventional pedals, the foot only rests on specific points of the pedal and gets distorted in the longitudinal direction because of the pedal's short surface. However, with its large contact surface the EP-1 gives full support to the sole of the foot. This prevents troubles like numbness or pain in the feet. The foot finds its ideal position on the large, anatomically shaped non-slip surface. The inner guide rails ensure a perfect positioning and avoid contact between foot and crank. The use of a short axle reduces the Q factor. This means that the "foot-knee-hip" joint sequence is aligned correctly with the axle. You will notice the gain in efficiency and comfort immediately. • plastic pedal body, CroMo axle • non-slip support surface with diamond profile • can be ridden on both sides • weight: approx. 364 g • 1 pair • manufacturer's ref.: 86060001
Maximum flexibility! The Ergotec Evo Touring bar ends can be adjusted infinitely to the needs of the cyclist. Their ergonomically angled grip surface is covered with damping foam material and can be turned 360°. Thanks to a ball bearing, the grip angle of the bar ends has an adjustment range of up to 15°. · forged aluminium · weight: approx. 360 g (pair) · length of the grip surface: approx. 210 mm · for handlebar Ø 22,2 mm · 1 pair
High-quality, smart rear view mirror with forged aluminium casing. By turning the casing, the mirror can be used for left and right mounting. Angle-adjustment via a robust ball joint. · arm made of aluminium · arm length: approx. 12 cm · required clamp width to the handlebar: approx. 13 mm (with cone adapter, item no. 2008866 (not included), also suitable for inner handlebar mounting) · suitable for handlebar outer Ø 22,2 mm, incl. handlebar plugs · available as model: M-88: mirror dimensions: approx. 10,5 x 5 cm or M-99: mirror dimensions: approx. 12 x 7,5 cm Please specify model!
Variable but still robust! The angle of this stem is adjustable from -20° to +40°. Thanks to four clamping screws, its stability is comparable with that of rigid stems. The degree scale at the side of the stem makes it a child’s play to ideally adjust the handlebar position. · handlebar clamp: Ø 25,4 mm · for threadless forks with shaft outer Ø 28,6 mm* · weight: approx. 295 g (100 mm) · clamping height on the steerer tube: 45 mm · screw-mountable 4-axis handlebar clamp
The ergotec stem has an impressive adjustment range from -20° to +40°, without looking too massive. The stepped angle adjustment with 4 clamping screws guarantees a secure hold at every angle, even when heavily loaded. · handlebar clamp: Ø 31,8 mm · material: aluminium 2014 T6 · for threadless forks with shaft outer Ø of 28,6 mm · weight: approx. 200 g (100 mm) · clamping height on the steerer tube: 45 mm
A TÜV-tested handlebar that has earned the title of multifunction handlebar. The handlebar ends of the multifunction handlebar system: 1. are removable > this allows simple mounting of a twist grip shifter, for example, and makes it easier to fit subdivided soft grip sheaths 2. can be turned smoothly through 360° > allowing you to choose between a sporty, a moderate or a comfortable cycling position without having to open the stem and adjust the shift and brake levers 3. can be adjusted to an offset of between 0° and 90° > in the 90° setting the bike is much more compact for transport, for example · material: handlebar: aluminium, screws: stainless steel · width: (depending on offset) 140 - 620 mm · weight: approx. 610 g · incl. soft grip sheath and end plugs (already fitted) · available with handlebar clamp Ø 25,4 mm or 31,8 mm Please specify handlebar clamp!
The Easyliner II is a high-quality aerobar. Once your forearms have found the right position on the shock-absorbing pads and your hands have gripped the coated tubes, the Easyliner offers you an additional, comfortable riding position. Your position when using the Easyliner relieves arm and torso muscles. Moreover, this position gives you an enormous advantage when fighting against the wind, thanks to improved aerodynamics. · adjustable outer WingSystem arm rests · material: aluminium 6061 · total length from arm rest end to extension end approx. 360 mm · suitable for handlebar clamp Ø 25,4-26,0 and 31,8 mm · weight: approx. 585 g
The Ergotec product line offers you a lot of possibilities to counteract cycling-specific physical problems. The Octopus 50 stem does so by raising the basic height by 50 mm. It also provides you with an angle adjustment that lets you find your optimum torso/arm position. Pressure on the body's supporting muscles is reduced and the probability to enjoy carefree bike tours increases. • handlebar clamping: Ø 25,4 mm • material: aluminium 6061 T6 • clamping height on the steerer tube: 41 mm • total height: 94 mm • angle adjustment: 0° - +60° • screw-on 4-point handlebar clamping • for threadless forks with shaft outer Ø 28,6 mm (also suitable for threadless forks with shaft outer Ø 25,4 mm with a reducing sleeve, see item no. 522566) • length: 110 mm • weight: approx. 350 g • manufacturer's ref.: 40192001 (black), 40192101 (silver)
Classic shaft stem with stainless steel shaft for threaded shaft systems at trekking bikes or mountain bikes. Thanks to a wide adjustment range and an extra long shaft, comfortable riding positions can be realised. · adjustment range: 0° to +50° · handlebar clamp: Ø 25,4 mm · shaft length: 300 mm · stem length: 90 mm
The Ergotec Aerowing II stands for comfort without sacrificing cycling dynamics. The generous offset and gentle rise of the handlebar ends towards the rider allow a relaxed grip, as the wrists can follow their natural direction. At the same time, however, the cyclist can maintain a sporty sitting position without losing the feeling of direct control over the handlebar. · material: aluminium 6061 T6 · offset: 34° · weight: approx. 316 g · width: approx. 620 mm, height: approx. 20 mm · handlebar clamp: Ø 31,8 mm
The design of the generation 650B frame requires relatively short stems. The Ergotec Piranha offers you a way of adapting your handlebar/stem construction. · material: aluminium 6061 T6 · handlebar clamp: Ø 31,8 mm · clamping height on fork shaft: 42 mm · screwable 4-point handlebar clamp · angle: ±6° · for threadless forks with outer shaft Ø 28,6 mm* · weight: approx. 146 g (70 mm) · supplied in length 50 or 70 mm Please specify length!
Lightweight, 3D forged stem with closed fork shaft clamp and a beautiful design. Its generous angle of 45° allows an upright sitting position. · handlebar clamp: Ø 25,4 mm · material: aluminium 6061 T6 · clamping height on the steerer tube: 40 mm · angle: +45° · screw-mountable 4-point handlebar clamp · for threadless forks with shaft outer Ø 28,6 mm* · weight: approx. 180 g (90 mm) · available in 90 or 110 mm length Please specify length!
Robust seat post made of aluminium 6061 T6 with which you can achieve an offset of approx. 15 mm. The specially shaped bend area gives the seat post and the bike a special look. · length: approx. 400 mm · weight with Ø 31,6 mm: approx. 364 g · available in Ø 27,2 or 31,6 mm Please specify diameter!
No transport problems while travelling by aeroplane or train, no painful shinbones in the garage. You can fold in the platform with two movements to save a lot of space. The platforms are slip-proof and have two reflectors. · ball bearings · weight: approx. 460 g (pair) · 1 pair