What shoe size do you have?
Based on all scanned shoe data, we can tell you the exact size of the shoe chosen and give you a size recommendation.
Your standard shoe size:
You can use your measurements!
Feet not yet measured?
You can either let your feet be measured in 3D in one of our stores or select your shoe size on the left.
Feet already measured?
Feet not yet measured?
You can either let your feet be measured in 3D in one of our stores or select your shoe size on the left.
The currently recommended sizes correspond to an average size of .
The currently recommended sizes are based on your measurement data stored.
Environmentally friendly base rain protection. The lightweight 2-layer cycling rain jacket with thin mesh lining reliably protects you from rain and wind. The hood can be rolled up and stowed in the collar. With VAUDE GREEN SHAPE quality seal! Further features of this jacket: CEPLEX active 2-layer laminate, 2 front pockets with zip, 2-way front zip with flap, drawstring on bottom hem, adjustable through pockets, width-adjustable cuffs, integrated, adjustable hood that can be stowed in the collar, divided lining, upper part made of mesh, lower part made of tafetta, reflective elements. Material: 100% polyester (PU coated) Mesh lining: 100% polyester Lining: 100% polyamide VAUDE CEPLEX active: Waterproof, windproof and highly breathable membrane or coating of the fabric. CEPLEX active features a water column of 15.000 mm and a breathability of 15.000 g/m²/24 h. BLUESIGN APPROVED: The bluesign standard is the world’s strictest standard for environmental protection, safety at work and consumer protection. All environmentally relevant production processes are critically examined and permanently optimised in terms of choice of materials, energy and water consumption, air emissions, water emissions, noise levels, waste and use of chemicals. The “bluesign approved fabric” label is applied to products where 90% of the textiles used conform to the bluesign standard. GREEN SHAPE: Green Shape is the VAUDE quality seal for environmentally-friendly products. The criteria are strict: a product may only bear the Green Shape label if it is made from at least 90% environmentally-friendly materials such as organic cotton, recycled materials or the wood fibre Tencel, or if it has been dyed with VAUDE eColour or meets the "bluesign product" standards.
PRO FIBRE THERMAL material, ergonomic cut, short front zip and high back, lower leg zips with reflective piping, PRO FIBRE ELASTIC seat pad. Material: 89% polyester, 11% elastane PRO FIBRE THERMAL material: · double-layer material construction: the inside provides fast moisture absorption, the outside guarantees fast moisture transfer and redrying thanks to its open-pore mesh structure · resistant to deformation and easy-care PRO FIBRE ELASTIC seat pad: One-piece pad construction, saddle-shaped central piece made of bi-elastic material, with compact foam padding for better cushioning, ventilation channels for increased wearing comfort. Material: 100% polyester
– Roadbike 05/15: Test winner – The ATMOS II road helmet by GIRO offers featherlight comfort for every tour. An extensive ventilation system provides a cool head when it's getting intensive. A lightweight pro for ambitious athletes. Details: • made with INMOULD technology with different degrees of hardness • especially lightweight strap system • durable ROLL CAGE REINFORCEMENT reinforcements • ventilated ROC LOC 5 FIT SYSTEM • excellent ventilation thanks to 26 vents and WIND TUNNEL VENTILATION system • antibacterial X-STATIC inside pads • SUPER FIT ENGINEERING fit Manufacturer's ref.: 200118 Weight: approx. 270 g INMOULD: The inner shell of the helmet is formed by means of foam applied under high pressure and great heat beneath the outer shell. This firm bond creates an extremely stable and very light helmet structure. ROLL CAGE REINFORCEMENT: The helmet's EPS inner shell is reinforced with especially high-strength nylon to ensure additional safety and stability. ROC LOC 5 FIT SYSTEM: The adjustment system in a mini housing allows for an easy adjustment with just two fingers. Apart from the width, you can also individually adjust the height, which ensures a perfect fit. WIND TUNNEL VENTILATION: A clever ventilation system consisting of internal channels and active vents ensures that cool and fresh air is conducted around the head, while the heat can flow away to the outside. Best ventilation during highly intensive activities. X-STATIC: The inside pads come with fibres containing silver as well as with an antibacterial treatment to reduce odour formation. The warmth-reflecting and breathable properties of the fabric allow for a pleasant climate. SUPER FIT ENGINEERING: The helmets by Giro had to undergo numeorus test rides and measurements before they were perfectly shaped and desgined on the basis of all test results. Thanks to their clever shape and a huge range of sizes, GIRO helmets fit almost any head.
The NORTHWAVE SCORPIUS S.R.S. MTB shoe comes in a THERMOWELDED LAYER design and with the AIRFLOW SYSTEM. Details: • Sole: JAWS CARBON REINFORCED • Upper material: ultra-light PU (polyurethane coated synthetic leather) • Upper: MULTILAYER THERMOWELDED + AIRFLOW SYSTEM • Closure system: S.R.S. + asymmetric velcros • Heel: INTEGRATED HEEL SYSTEM • Insole: PERFORMANCE ADVANCED Weight: approx. 373g (size 42) Manufacturer's ref.: 80142006 JAW CARBON REINFORCED: MTB sole made of thermoplast, carbon-reinforced material, natural rubber outsole for a low weight and maximum grip even in rough terrain. The sole is compatible with all common SPD-MTB systems. MULTILAYER THERMOWELDED: Large mesh inserts are directly thermowelded into the supporting structure of the upper material. Thanks to the single-shell seamless construction, this special technology can be used to further reduce the weight and the thickness of the upper material. AIRFLOW SYSTEM: Micro holes at strategically good places of the completely seamless and thus even lighter upper material ensure great ventilation. S.R.S. ratchet system + asymmetric velcros: Made of forged aluminium, very robust and exchangeable, offers absolute precision when closing the shoe. The mechanism adapts to any foot shape and is designed to be adjusted while riding, too. Thanks to 2 asymmetric velcros, the shoe adapts even better to the anatomy of the foot. INTEGRATED HEEL SYSTEM: Thanks to the new single shell design of the upper material, an efficient heel support could be directly integrated into the structure without additional elements. Same effect, lower weight. PERFORMANCE ADVANCED: Ergonomic design: because when you're pedalling, your body should be in the ideal position without feeling uncomfortable.
- Buy recommendation MountainBike magazine 1/2015 - The ROSE WIND jacket is the ideal thermal jacket for your winter training. Thanks to the WIND FIBRE material, this must-have reliably protects you from wind and light rain. Details: • cycling jacket made of windproof and water-repellent WIND FIBRE material • PRO FIBRE stretch inserts on central back and inner sleeves for more freedom of movement • stand-up collar with fleece inside • full-length front zip with zip garage and reflective piping • small sleeve pocket with zip • two back pockets with zip • cuffs with windstop • longer back panel • drawstring waist • reflective elements Material: 100% polyester Side inserts: 95% polyester, 5% elastane WIND FIBRE: • windproof and water-repellent • breathable and comfortable to wear • keeps the body warm and thus fit PRO FIBRE: • strongly wind-repellent • slightly water-repellent • moisture-wicking • super light
The G CHRONO road shoes by GAERNE have an EPS COMPOSITE CARBON sole – a combination of nylon and carbon fibres. Therefore they have a higher stiffness than common nylon soles. The BOA L5 speed lacing system allows a particularly fast putting on and taking off. Details: • upper made of supple microfibre with laser drillings and mesh inserts at the sides • EPS COMPOSITE CARBON sole • BOA L5 speed lacing and velcro closure • outstanding breathability • perforated and lined tongue provides air circulation and wearing comfort • replaceable and super light comfort insole • anatomic heel cap made of non-formable plastic offers hold, skid resistance and stabilisation • control system at the heels for optimum positioning during the ride • reflective elements • compatible with all standard LOOK, SPD-SL, Speedplay, Keo and Time Impact pedals • made in Italy GAERNE recommends to order the shoes one size up. Manufacturer's ref.: 3277 EPS COMPOSITE CARBON: This sole is made up of a nylon percentage and a carbon core running along the foot arch. Thanks to this composition, the sole does not only stand out for its lightness, but also for its high stiffness. It assures good pedal contact and prevents thus energy loss. Anti-slip rubber inserts on front and back offer safety when walking. BOA L5: The twist closures with wires made of stainless steel allow for a particularly precise adjustment. The closure provides an optimum fixation of the foot. By pushing the button and turning in a clockwise direction, the shoe is closed. By pulling out the button, the laces can be loosened.
Long cycling tights made of brushed and insulating PRO FIBRE THERMO material, high-necked back, knees reinforced with double-layer thermal material, thermal tights with a short front zip, ankle zips. Without seat pad. Material: 89% polyester, 11% elastane PRO FIBRE THERMO functional material: · 2-layer material construction: the inside provides fast moisture absorption, the outside guarantees fast moisture-wicking and drying thanks to the open-pore mesh structure · shape-retaining and easy-care · brushed inside for best insulation
MountainBike 05/2013 Verdict: Good - Sporty MTB/trekking shoes for everyday use! - Upper material: robust synthetic leather (PU coated) combined with wear-resistant mesh Footbed: removable, perforated EVA foam cushion sole with moisture-wicking cover Heel: anatomic heel reinforcement with abrasion-resistant material trim on the outside Sole: EVA midsole (= ethylene vinyl acetate: light and elastic foam material with good cushioning properties) with anti-slip outsole with rubber tread for good power transfer and a high degree of comfort when walking, compatible with SPD-MTB pedals Details: lacing and velcro for a secure fit, moisture-wicking synthetic material at the heel, heel strap with reflective fading, tread protection edges at the heel and toe Weight: approx. 475 g (for size 42)
Knee-length bib tights made of brushed insulating PRO FIBRE THERMO material, high-necked back, 8-panel cut, preshaped knees, silicone leg grippers, cycling bib tights with a short front zip, PRO FIBRE ELASTIC seat pad. Material: 89% polyester, 11% elastane PRO FIBRE THERMO functional material: · 2-layer material construction: the inside provides fast moisture absorption, the outside guarantees fast moisture-wicking and drying thanks to the open-pore mesh structure · shape-retaining and easy-care · brushed inside for best insulation PRO FIBRE ELASTIC seat pad: • one-piece pad construction with bladder protection • central piece in saddle shape made of bi-elastic material • compact foam padding for better shock-absorption • ventilation channels for increased breathability Material: 100% polyester
The SPEEDairo helmet by CASCO combines speed with ventilation. The optimised aerodynamics of this bike helmet make it extra fast. To achieve this, the helmet sides were closed and a large visor was attached. A thought-out ventilation system guarantees a cool head during fast rides. Details: • Road bike helmet with MONOCOQUE ULTRA multi-layer construction and complex DOUBLE SHELL construction • Removable, mirrored SPEEDmask CARBONIC visor can be lifted and is suitable for wearing sports glasses underneath • DISCFIT VARIO adjustment system • CASCO-LOC closure system • AIRFIT technology for optimised aerodynamics and even better ventilation • Closed helmet sides for unhindered airflow • Large vents with anti-insect mesh • Coloured CASCO MYSTYLE stripes for replacement (item no. 2086253); 360 degree visibility thanks to reflective strips (item no. 2086262) • Available in two shell sizes for a perfect fit • Certified according to EN 1078 standard • Including transparent all-weather cover • Including removable sun shield • Including multi-functional scarf • Mirrored SPEEDmask CARBONIC visors (item no. 1988307) or self-tinting SPEEDmask VAUTRON visors (item no. 2140825) can be retrofitted if desired Manufacturer's ref.: 502 (black), 506 (white) MONOCOQUE ULTRA: The multi-layer construction of the helmet allows for an individual material composition for every helmet zone in order to provide even better protection. DOUBLE SHELL: Sophisticated double shell construction for additional safety and a compact design. CARBONIC: This self-cleaning and hydrophobic lens technology keeps oil and water from sticking to the lens. An anti-scratch coating additionally protects the lens. Moreover, the lens has a greater impact resistance than polycarbonate and offers 100% UV protection. DISCFIT VARIO: The adjustment system at the back of the head can be easily adapted to your head measurements via a turn knob. It can also be shifted vertically to ensure an ergonomic fit. CASCO-LOC: The closing mechanism can be operated with one hand and thus allows for easy adjustment while riding. AIRFIT: An integrated mesh that is attached to the inner shell makes sure that the inner shell does not touch the scalp. This contactless fit of the helmet not only offers an outstanding fit, but also allows for a constant, cooling air stream around the head. This ensures improved thermoregulation.