- Abstract SKU
- 2700429
- SKU
- 231538801
- Abstract Product Id
- 143080
- Concrete Product Id
- 589458
Knipex TubiX® Pipe Cutter
69.95 € RRP €89.25
Price incl. VAT plus €16.35 (for delivery to United States of America)
Product code: 231538801
Store availability
Shortening the steerer tube or seat post can be quick, precise, and practically effortless with the Knipex TubiX® tube cutter. Perfectly positioned on the tube with just one hand, the rotating roller cutter quickly cuts threadless steerers with a diameter of up to 1 ¼" as well as metal tubes with a diameter of 6 - 35 mm made of steel, aluminium, copper, brass or stainless steel. This saves you from having to use a vice and saw, while also ensuring a clean, straight cut edge with exact measurements in just a few minutes.
It's that simple: Position the opened TubiX® pipe cutter at the cut mark and push the cutting wheel firmly against the pipe using the one-handed QuickLock device and secure it in place. Rotate the tool while continuously tightening the cutting wheel using the ergonomic turning knob. The result is a perfectly cut pipe that can be reworked with the integrated deburring tool if necessary.
Details:
• Simple to use pipe cutter for all metal pipes
• Ideal for shortening steerer tube, seat post, handlebars etc.
• For pipe Ø from 6 - 35 mm (¼" - 1 ⅜")
• Wall thickness: approx. 2 mm
• QuickLock one-handed positioning of the cutting wheel
• Independent holding and clamping on the pipe, without slipping off
• High-quality needle bearings on cutting wheel and guide rollers
• Cutting wheel made of high-quality ball bearing steel
• Cutting wheel quick-change system (spare wheel in handle knob)
• Fold-out deburring tool for clean interfaces
• Also suitable for cutting fibre-free plastics
Technical details:
• Material: steel alloy, magnesium (housing), ball bearing steel (cutting wheel)
• Dimensions: approx. 180 x 65 x 40 mm
• Weight: approx. 330 g
In the box:
• 1 Knipex TubiX® pipe cutter
Note:
When used with very soft material and sensitive surfaces, the tension of the cutting wheel should be carefully adjusted so as not to deform any material or leave running marks from the guide rollers. Can only be used to a limited extent for carbon fibre-reinforced pipes, as it may not completely cut through the fibres.
- Brake:
- No
- Bottom bracket:
- No
- Crankset:
- No
- Chain:
- No
- Hub and spokes:
- No
- Pedals:
- No
- Tyres:
- No
- Fork and headset:
- No
- Cassette:
- No
- Frame:
- Yes
- Manufacturer`s ref.:
- 903102SB
- GTIN:
- 4003773084686