Rose Hook-In Adjust 45 Bicycle Wall Mount

With the Hook-In Adjust 45, your bike is stylishly positioned horizontally on the wall.

The support arms can be individually adjusted by up to 45 degrees, allowing the mount and bike to be perfectly aligned horizontally on the wall, regardless of the frame geometry. 
 
The mount is suitable for bikes weighing up to 25 kilograms, and the telescopic arm allows the wall clearance to be adjusted for handlebar widths of up to approx. 770 millimetres.

The paint-friendly silicone inserts on the tube supports protect the frame from scratches, while the included Velcro strap reliably secures the front wheel.
 
Details:
• Bicycle wall mount with adjustable support arms (up to 45° each)
• Angle of the bike can be adjusted once it is hooked in
• Telescopic arms for adjustable wall distance of the tube supports from 29-39 cm
• Robust steel tube construction for wall mounting
• Two holders where the top tube can be hung up
• Tube supports with silicone insert to protect the paintwork
• With Velcro strap for securing the front wheel
  
Technical details:
• Material: steel, plastic, silicone
• Maximum handlebar width: approx. 770 mm
• Maximum top tube diameter: approx. Ø 50 mm
• Maximum load capacity: 25 kg
• Weight: approx. 1,990 g
 
In the box:
• 1 Rose Hook-In Adjust 45 bicycle wall mount
• 1 mounting material
 
 
Note:
The bicycle wall mount is designed for mounting on solid masonry or concrete walls. Use the screws and wall plugs supplied, or equivalent products. For other types of masonry, e.g. precision-ground clay bricks, AAC blocks, etc., and when fixing to solid timber, special screws must be used (not included). The wall mount should not be used on drywalls.
 
For indoor use only!

Manufacturer: Rose Bikes GmbH, Schersweide 4, 46395 Bocholt, Germany, www.rosebikes.de